Sinopec Sinopec Thermoplastic Elastomer Seps Yh-4010 for Gelling Agent

• Customization: Available
• Raw Material: Hydrogenated Styrene Butadiene Block Copolymer
• Material: Hydrogenated Styrene Butadiene Block Copolymer
• Model NO.: YH-4010
• Appearance: Powder
• Form: Powdered Rubber
• MOQ: 1 Mt
• Place of Origin: Hunan, China
• CAS No.: 91261-65-3
• Structure: Linear, Di-Block
• Di-Block Content %: 100
• Styrene Content %: 37
• Hardness Shore a: 80
• Transport Package: 13kg/Bag
• Specification: 13kg/bag
• Trademark: SINOPEC
• Origin: Hunan
• HS Code: 4002191100
• Production Capacity: 100000mt/Year

Product Description

Product Description
Baling Petrochemical SEPS series product is hydrogenated styrene - isoprene block copolymer in the form of white porous granule or powder. It is mainly used in the lubricating oil viscosity improver, fiber filling gel, elastomer products and plastics modification. On the aspect of lubricating oil viscosity improvement, it has features of thickening, low-temperature, and viscosity - temperature performance, shear stability, anti-oxidation stability, etc, suitable for blending of long-span lubricating oil, low dissolving temperature and fast dissolving rate when blending the lubricating oil.

YH-4010 Basic Performane

Item	Typical Value (with no limitation)
Structue	Linear, di-block
Styrene content %	37
Di-block content %	100
Hardness,Shore C (1sec)	80
25% Styrene solution viscosity at 25ºC/mPa.s	≥ 50,000
MFR G/10min (5kg,200ºC)	< 0.1
Appearance	White powder or fluffy granule

Detailed photos
 

Packaging and shipping 
13kg polyethylene packaging bag.

SEPS Application

YH-4010 is 100% di-block polymer, and is mainly applied to the gelling agent of water-resistant thixotropic fiber filling gel, thickening of cosmetics white oil, water retaining ointment of cosmetics. When YH-4010 is applied to fiber filling gel, it has stable physical and chemical properties, good viscosity - temperature performance and low oil separation rate, and is easy to pump in the fiber. YH-4010 can be blended with hydrogenated white oil to get the fiber filling gel, and after YH-4010 is mixed with hydrogenated white oil, the typical performance and viscosity - temperature performance is as follows.
 

Performance after YH-4010 is Mixed with Hydrogenated White Oil (Typical Value, with No Limitation)

Item	Performance
Appearance	Clear and transparent
Dropping point, ºC	185

 

Mixing process: Mix the hydrogenated white oil with YH-4010 for 3h at 120ºC and get the paste; formula: 90g hydrogenated white oil, 10g SEP-4010.
Company profile

Sinopec Baling Petrochemical Co., LTD. is a large-scale petrochemical complex integrating oil, chemical, fiber and fertilizer, and the largest domestic lithium polymer, epoxy resin, caprolactam, commercial cyclohexanone production enterprises.  
Baling Petrochemical Co. Ltd. affiliated to Sinopec, it has 14 affiliated units, including Olefin Division (oil refinery), cyclohexanone Division,Synthetic Fiber Factory, Synthetic Rubber Division, Epoxy Resin Division, Thermal Power Division, Power Division, Water Supply and Treatment Division, Supply and Marketing Division, Yunxi Community, Urban Community and etc..

Baling Petrochemical Co. Ltd is listed among the top 500 powers in China with advantages in the combination of oil, chemical, fiber and fertilizer products and in the integrity of products. With the largest catalytic unit of oil refinery in China, as the domestic largest producer of SBS, caprolactam, epoxy resin and cyclohexanone, Baling is an important energy and chemical production base in south-central China.
FAQ

Q1:  What's the MOQ and Delivery Time of Thermoplastic Elastomer SEBS ?
A:   MOQ: 1MT (Better for 1 container) 5 working days for Delivery time.
 
Q2:  What payment do you accept?
A:   Generally, we accept T/T . Other terms can also be negotiable.
 
Q3:  Are you a manufacturer of Thermoplastic Elastomer SEBS ?
A:  Sinopec Baling Petrochemical Co., LTD. is one of four main synthetic rubber production bases of Sinopec Group,it is also one domestically base  for researching, producing and selling Thermoplastic Elastomer.

Q4:  Could you accept print my logo on product ?
A:   We support OEM & ODM service. Pls contact us for more details.  

Q5:  Could You export Thermoplastic Elastomer SEBS to European?
A:    Yes, we have Reach. So it's no problem for us export to European market.
 
Q6:  Do you accept the Inspection of Thermoplastic Elastomer SEBS ?
A:    Yes, we accept the inspection, you can apply for any test. Such as SGS and ROSH 

Q7:  Could You supply the Thermoplastic Elastomer SEBS samples for we test?
A:    Yes, no problem, usually factory can offer 1-2kg sample for free, pls contact with us our workable for Epoxy Resin samples.