| CAS No.: | 25038-54-4 |
|---|---|
| Formula: | C6h13no |
| EINECS: | 211-024-8 |
| Material: | PA6 |
| Usage: | General Plastics, Engineering Plastics, Specialty Plastics |
| Plastic Properties After Heated: | Thermoplastic Plastics |
| Customization: |
|---|
Suppliers with verified business licenses
Audited Supplier BL3180/3200 Low Viscosity Nylon 6 chips
Compared with conventional polyamides, low viscosity nylon 6 resin has reduced fluid mechanical volume, relatively reduced melt viscosity and solution viscosity, and has good fluidity. Its basic physical properties are shown in the table below.
1.1000KG/BAG 2.25KG/BAG
1. Complex shape, thin wall plastic parts:
Because of its excellent melt fluidity and the comprehensive thermal and mechanical properties of nylon 6, it can be widely used for injection of various complex shape, thin wall plastic products.It can shorten injection cycle time, greatly reduce injection pressure, reduce clamping force and processing temperature.
2. A variety of high content long and short fiber reinforced or high mineral filled and flame retardant modified base resins:
High flow nylon 6 resin can not only fully penetrate and fill into the reinforcement fiber, but also provide exquisite interface to meet the performance standards of semi-finished products. It can be made into large size and complex shape parts, as well as parts with thin wall and reinforcement, excellent surface appearance, completely solve the "floating fiber" phenomenon; The flame-retardant enhanced modification can make the dispersion of flame retardant more uniform and improve the efficiency of flame retardant and the comprehensive mechanical properties greatly. Reduce mold scale and mold wear, reduce maintenance costs.After using high fluidity nylon, the surface appearance of the reinforced material parts is good, the surface of the products is less sand or swirl pattern defects, the surface of the products is good, and the surface dyeing process is avoided.
3. Color master batch or high content mineral master batch carrier:
High flow nylon 6 resin is conducive to the full dispersion of various organic and inorganic toners or minerals in the screw.
4.Brightly colored plastic products and spinning materials:
Baling high flow nylon 6 resin can be widely used in brightly colored plastic and spinning products with good color fastness due to its much higher end amino group than conventional linear nylon 6 resin.
Sinopec Baling Petrochemical Co., LTD. is a large-scale petrochemical complex integrating oil, chemical, fiber and fertilizer, and the largest domestic lithium polymer, epoxy resin, caprolactam, commercial cyclohexanone production enterprises.
Baling Petrochemical Co. Ltd. affiliated to Sinopec, it has 14 affiliated units, including Olefin Division (oil refinery), cyclohexanone Division,Synthetic Fiber Factory, Synthetic Rubber Division, Epoxy Resin Division, Thermal Power Division, Power Division, Water Supply and Treatment Division, Supply and Marketing Division, Yunxi Community, Urban Community and etc..
Baling Petrochemical Co. Ltd is listed among the top 500 powers in China with advantages in the combination of oil, chemical, fiber and fertilizer products and in the integrity of products. With the largest catalytic unit of oil refinery in China, as the domestic largest producer of SBS, caprolactam, epoxy resin and cyclohexanone, Baling is an important energy and chemical production base in south-central China.
Q1: What's the MOQ and Delivery Time of Nylon 6 chips?
A: MOQ: 1MT (Better for 1 container) 5working days for Delivery time.
Q2: What payment do you accept?
A: Generally, we accept T/T . Other terms can also be negotiable.
Q3: Are you a manufacturer of Nylon 6 chips?
A: Sinopec Baling Petrochemical Co., LTD. is one of the domestically largest bases for researching, producing and selling Nylon 6 chips.
Q4: Could you accept print my logo on product ?
A: We support OEM & ODM service. Pls contact us for more details.
Q5: Could You export Nylon 6 chips to European?
A: Yes, we have Reach. So it's no problem for us export to european market.
Q6: Do you accept the Inspection ofNylon 6 chips?
A: Yes, we accept the inspection, you can apply for any test.
Q7: Could You supply the Nylon 6 chips samples for we test?
A: Yes, no problem, usually factory can offer 1-2kg sample for free, pls contact with us our workable for Nylon 6 chips samples.
Suppliers with verified business licenses
Audited Supplier 
){kind=link}
){kind=link}