HDPE High Quality and Inexpensive Low-Pressure High Density Polyethylene

• Customization: Available
• Feature: Photodegradable
• CAS No.: 9002-88-4
• Model NO.: 6095H/5000S
• Formula: - [CH2-CH2] N -
• EINECS: 221-80-2
• Material: High Density Polyethylene/HDPE
• Usage: General Plastics
• Plastic Properties After Heated: Thermoplastic Plastics
• Plastic Forming Method: Blow Molding
• Color: White
• Transport Package: 25kg/Bag
• Specification: 25KG/Bag
• Trademark: Sinopec
• Origin: China
• HS Code: 39012000

Product Description

Product Description

High density polyethylene (HDPE) is a white powder or granular product. Non toxic, odorless, with a crystallinity of 80% to 90%, a softening point of 125 to 135 ºC, and a usage temperature of up to 100 ºC; Hardness, tensile strength, and creep resistance are superior to low-density polyethylene; Good wear resistance, electrical insulation, toughness, and cold resistance; Good chemical stability, insoluble in any organic solvent at room temperature, resistant to acid, alkali, and corrosion by various salts; Thin films have low permeability to water vapor and air, and low water absorption.

Product Details

Item	Typical Value
Melt mass-flow rate  (g/10min)	10±2.0
Density(g/cm³)	0.935-0.945
Tensile Yield Stress(MPa)	≥21.0
Tensile Fracture Stress(MPa)	≥35.0
Tensile Fracture Strain(%)	≥600

Product Usage
High density polyethylene resin can be used to form plastic products through injection, extrusion, blow molding, and rotational molding methods. Injection molding can be used to produce various types of containers, industrial accessories, medical supplies, toys, shells, bottle stoppers, and covers. Blow molding can be used to form various hollow containers, ultra-thin films, etc. Extrusion molding can be used to form pipes, stretch strips, strapping, monofilaments, wire and cable sheaths, etc.
In addition, it can also be molded into decorative panels for construction, blinds, synthetic wood, synthetic paper, synthetic film, and molded calcium plastic products.